A large, two-stage, vapor-compression packing house refrigeration unit using R-134a produces 55.0 tons of refrigeration with an evaporator pressure of 80.0 kPa and a condenser pressure of 1.00 MPa. The intermediate flash chamber operates at 400. kPa and the isentropic efficiencies of the compressors in each loop are both 92.0%. The following operating specifications have been determined for the stages (loops):
Stage (Loop) A
|
Station 1A Compressor A inlet
|
Station 2sA Compressor A outlet
|
Station 3A Condenser A outlet
|
Station 4thA Expansion valve A outlet
|
|
P1A = 400.kPa
|
P2sA = 1.00MPa
|
X3A = 0.00
|
H4hA = h3A
|
|
|
S2sA = S1A
|
P3A = 1.00MPa
|
|
Stage (Loop) B
|
Station 1B Compressor B inlet
|
Station 2sV Compressor B outlet
|
Station 3B Condenser B outlet
|
Station 4hB Expansion valve B outlet
|
|
X1B = 1.00
|
P2sB = 400.kPa
|
X3B = 0.00
|
H4hB = h3B
|
|
P1B = 80.0kPa
|
S2sB = S1B
|
P3B = 400.MPa
|
|
For this design, determine
a. The mass flow rate of the refrigerant.
b. The system's coefficient of performance.
c. The total power required by the compressor.