A counterrotating eccentric mass exciter shown in figure is, Ask an Expert

Academics

A counterrotating eccentric mass exciter shown in Figure is used to determine the vibrational characteristics of a structure of mass 181.4 kg.

At a speed of 900 rpm, a stroboscope shows the eccentric masses to be at the ~op at the instant the structure is moving upward through its static equilibrium position, and the corresponding amplitude is 21.6 mm.

If the unbalance of each wheel of the exciter is 0.0921 kg· m, determine

(a) the natural frequency of the structure,

(b) the damping factor of the structure,

(d) the angular position of the eccentrics at the instant the structure is moving upward through its equilibrium position.

1590_Eccentric mass.jpg

View complete question

Physics, Academics

Category:- Physics
Reference No.:- M92588863

Have any Question?Write your Review or question?

Related Questions in Physics

Question a sensitive gravimeter at a mountain observatory

Question: A sensitive gravimeter at a mountain observatory finds that the free-fall acceleration is 0.0060 m/s2 less than that at sea level (gsealevel = 9.83 m/s2). Part A: What is the observatory's altitude? Assume Rear ...

Question in recent years astronomers have found planets

Question: In recent years, astronomers have found planets orbiting nearby stars that are quite different from planets in our solar system. Kepler-12b, has a diameter that is 1.7 times that of Jupiter (RJupiter = 6.99 Ã- ...

Question a solenoid 220 cm longand with a cross-sectional

Question: A solenoid 22.0 cm longand with a cross-sectional area of 0.500cm2 contains 415turns of wire and carries a current of 85.0 A. (a) Calculate the magnetic field in the solenoid. (b) Calculate the energy density i ...

Question pennies today are copper-covered zinc but older

Question: Pennies today are copper-covered zinc, but older pennies are 3.1 g of solid copper. What are the total positive charge and total negative charge in a solid copper penny that is electrically neutral?The density ...

Question a student is working in an optics lab and has a

Question: A student is working in an optics lab and has a light bulb which is 90 cm from a screen. She needs to make a real image of the bulb on the screen and she has a positive lens with a focal length of 12.5 cm. Find ...

Question a penny is placed at the outer edge of a disk

Question: A penny is placed at the outer edge of a disk (radius = 0.147 m) that rotates about an axis perpendicular to the plane of the disk at its center. The period of the rotation is 1.70 s. Find the minimum coefficie ...

Question suppose you have a block resting on a horizontal

Question: Suppose you have a block resting on a horizontal smooth surface. the block (mass m) is attached to a horizontak spring (spring constant k) which is fixed at one end. the mass is pulled to one side and released. ...

Question sams job at the amusement park is to slow down and

Question: Sam's job at the amusement park is to slow down and bring to a stop the boats in the log ride. If a boat and its riders have a mass of 800kg and the boat drifts in at 1.4m/s how much work does Sam do to stop it ...

Question a thin horizontal 20-cm-diameter copper plate is

Question: A thin, horizontal, 20-cm-diameter copper plate is charged to 4.0 nC . Assume that the electrons are uniformly distributed on the surface a) What is the strength of the electric field 0.1 mm above the center of ...

Question a pendulum on mars a certain simple pendulum has a

Question: A Pendulum on Mars. A certain simple pendulum has a period on the earth of 1.65 s. What is its period on the surface of Mars, where g = 3.71 m/s 2 ? The response must be typed, single spaced, must be in times n ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Physics Expert