A 2820 g galvanized steel washer with copper coating is, Ask an Expert

Academics

A 28.20 g galvanized steel washer with copper coating is treated with nitric acid. The copper coating is completely removed by reaction with nitric acid and the mass of the washer is now 26.52 g. The washer has an outer diameter D = 45.0 mm, an inner diameter d = 9.0 mm, and a thickness h = 3.0 mm. Copper has density of 8.96 g/cm3.

1. What is the mass of copper coating (in gram)?

2. What is the total volume of copper coating (in mm3, 1cm3 = 1000 mm3)?

3. What is the surface area of the washer (in mm3)? Surface area can be calculated with the following equation: SA= ph(D+d)+(1/2)p(D2-d2)(use 3.1416 for p value)

4. Calculate the thickness of the copper coating (in mm) using the equation
V = (SA) ×(coating thickness)

5. If a single layer of copper atom is 0.270 nm thick (atomic radius of copper = 0.135 nm), how many layers of copper atoms are in the galvanized coating?

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M91020342

Have any Question?Write your Review or question?

Related Questions in Chemistry

How many moles of magnesium ion are present in 525g

How many moles of magnesium ion are present in 5.25g Mg 3 (PO 4 ) 2 ?

Draw the molecule by placing atoms on the grid and

Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. Show the formal charges of all atoms in the correct structure.

A sample of caco3nbsps is introduced into a sealed

A sample of CaCO 3 (s) is introduced into a sealed container of volume .654 L and heated to 1000 K until equilibrium. The reaction is . K p for the reaction is3.9*10 -2 at this temperature. Calculate the mass of CaO(s ...

A sample consisting of 10 mol caco3s was heated to 800 degc

A sample consisting of 1.0 mol CaCO3(s) was heated to 800 °C, when it decomposed. The heating was carried out in a container fitted with a piston that was initially resting on the solid. Calculate the work done during co ...

Anbsp4260nbspgram sample of a hydrate ofnbspbai2nbspwas

A 42.60 gram sample of a hydrate of BaI 2 was heated thoroughly in a porcelain crucible, until its weight remained constant. After heating, 39.01 grams of the dehydrated compound remained. What is the formula of th ...

Hydrogen peroxide was catalytically decomoposed and 753 ml

Hydrogen peroxide was catalytically decomoposed and 75.3 mL ofoxygen gas was collected over water at 25 degrees celsius and 742torr. What mass of oxygen was collected? (Pwater =24 torr at 25 degrees celsius)

1 balanced equation for thenbspdouble-replacement

1. Balanced equation for the double-replacement precipitation reaction described, using the smallest possible integer coefficients. A precipitate forms when aqueous solutions of iron(II) chloride and sodium hydroxid ...

What is the balanced equation what is the calculation of

What is the balanced equation? What is the calculation of the number of moles and grams of Al2(SO4)3 formed from 15.3 grams of H2SO4. Answering to 3 significant figures. Al(OH)3 + H2SO4 → Al2(SO4)3 + H2O

Silver nitrate has the molecular formula agno3 in a 1090 g

Silver nitrate has the molecular formula AgNO3. In a 109.0 g sample of silver nitrate, how much of that mass (in g) is from the silver atoms?

A decompression chamber used by deep-sea dives has a volume

A decompression chamber used by deep-sea dives has a volume of 10.3 m 3 and operates at an internal pressure of4.5atm. What volume, in m 3 would the air in the chamber occupy if it were at 1 atm pressure, assuming no t ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert