85 ml of a sample of sea water solution was added to a, Ask an Expert

Academics

8.5 mL of a sample of sea water solution was added to a 44.317 g evaporating dish. The combination weighed 52.987 g. After eaporation the dish and contents weighed 44.599 g.

a.) What was the mass percent of dissolved solids in the sea water?

b.) The actual solution chloride content in the sea water was 2.69%. If it had been assumed that the dissolved solid(s) consisted only of sodium chloride, what percentage error would have resulted? [Caution: the answer is not 0.56%]? The numbers included here are for a typical sea water sample. In addition to NaCl, typical sea water contains about 0.56% by mass of compounds (primarily chlorides) of magnesium, calcium and potassium.

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M91039060

Have any Question?Write your Review or question?

Related Questions in Chemistry

An aqueous solution has a normal boiling point of 1020degc

An aqueous solution has a normal boiling point of 102.0°C. What is the freezing point of this solution? For water K b is 0.51°C/ m and K f = 1.86°C/ m.

1 balanced equation for thenbspdouble-replacement

1. Balanced equation for the double-replacement precipitation reaction described, using the smallest possible integer coefficients. A precipitate forms when aqueous solutions of iron(II) chloride and sodium hydroxid ...

Questionwhat is the ph of the solution that results from

Question: What is the pH of the solution that results from mixing 10.00ml of 0.050 M perchloric acid with 30.00ml of 0.040 M barium hydroxide

Does dissolved solids such as sugar and salt modifychange

Does dissolved solids such as sugar and salt modify/change the boiling point of water; do mixtures have the same boiling point as pure substances?

For the equilibrium2ibrgi2gbr2gnbspkp85times10-3 at 150

For the equilibrium 2IBr( g )?I2( g )+Br2( g ) Kp =8.5×10-3 at 150 °C. Part A: If 2.7×10-2 atm of IBr is placed in a 2.0-L container, what is the partial pressure of IBr after equilibrium is reached? Express your answer ...

A chemist must preparenbsp725 ml ofnbsp275 mm aqueous

A chemist must prepare 725. mL of 275. mM aqueous copper(II) sulfate CuSO4 working solution. He'll do this by pouring out some 0.316 M aqueous copper(II) sulfate stock solution into a graduated cylinder and diluting it w ...

Aqueous potassium phosphate was mixed with aqueous

Aqueous potassium phosphate was mixed with aqueous magnesium chloride, and a crystallized magnesium phosphate product was formed. Consider the other product and its phase, and then write the balanced molecular equation f ...

Suppose that you take 5000 gram of na2co3 and titrate it

Suppose that you take .5000 gram of Na2CO3 and titrate it with .115M HCL solution. What is the equivalence point volume expected for the complete titration? (Formula weights Na2CO3 = 105.99g/mol and HCL = 36.46g/mol)

H2g i2g 2hitemperature 731 kif 160 mol h2nbspand 420 mol

H 2 (g) + I 2 (g) = 2HI Temperature = 731 K If 1.60 mol H 2 and 4.20 mol I 2 areplaced in a 1.08 L vessel What is the equilibrium concentration of H 2 in the gaseous mixture? The equilibrium constant is K = 49.7

Match the reaction provided on the left with the correct

Match the reaction provided on the left with the correct reaction classification/type on the right [NOTE the reaction equations are not balanced] . Reaction classification/types can be used more than once or not at al ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert