To interface ad7705 with arduino due1 the input is coming, Ask an Expert

Engineering

To interface AD7705 With Arduino Due.

1. The input is coming from AD8495,Which is connected to pin number 6(Positive) And Pin 11(Grounded)(Negative) of AD7705

2. K-Type Thermocouple is given as input to AD8495

3. In between PIN 1,4,14 and 13 i.e SCLK,CS,DIN,DOUT optocouplers(EL817C) are connected in order to reduce 5v to 3.3v for Arduino Due

4. PIN 9th i.e reference in (Plus) REF192 is connected

5. Reset PIN 5th is connected to 5V.

6. Master clock signal i.e MCLKIN (PIN 2) is getting from arduino Due and a program is written to generate 2MHz

7. Arduino Due SPI is being used to interface Arduino Due tft Display Screen.

Requirements for our code :

To interface AD7705 With Arduino Due.

We need 10 measuring points per second and the output voltage should be converted to temperature.

Attached a rar file of the code, but i am getting an Output with the due tool, which i need to resolve

using Arduino IDE 1.7.10.

Attachment:- temp value arduino.rar

View complete question

Other Engineering, Engineering

Category:- Other Engineering
Reference No.:- M92748786
Price:- $140

Guranteed 48 Hours Delivery, In Price:- $140

Have any Question?Write your Review or question?

Related Questions in Other Engineering

Question - show that the zero-point energy of a simple

Question - Show that the zero-point energy of a simple harmonic oscillator does not contribute to its entropy or heat capacity, but does contribute to its energy and Helmholtz function.

Q 1a discontinuity is found fully developed from the toe to

Q. 1 A discontinuity is found fully developed from the toe to the bench surface on a 15 m high slope, slope angle 65°. The discontinuity (frictional angle 32° and cohesion 20 kN/m2) is planar and its strike is parallel t ...

Introduction to engineering design assignment -

Introduction to Engineering Design Assignment - Drafting Question 1 - Field notes and traverse drawing may be an outdated form of keeping and presenting information on the position of features on a site. Modern electroni ...

Assignment -problem 1 - given is the lcc difference

Assignment - Problem 1 - Given is the LCC difference equation that represents some LTI system: y(n) - ¾y(n-1) - ¼y(n-2) = x(n) + x(n-1) a) Find the impulse response of the system (solve the LCCDE). b) Draw a block diag ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Design a five bit signed Design a five bit signed comparator.

Design a five bit signed comparator.

1 online discussion forum - post your proposed topic and

1. Online Discussion forum - Post your proposed topic and chosen data set as well as a short plan for the project. This is required for approval of the topic. As discussed, students must select unique topics, therefore i ...

Load fault level analysis amp protection design of a remote

LOAD, FAULT LEVEL ANALYSIS & PROTECTION DESIGN OF A REMOTE AREA MICROGRID Assignment Please undertake the following analyses: 1. Calculate the 3-phase fault levels on Bus 2, Bus 3 and Bus 4 with the main supply connected ...

Part 1configure verify and troubleshoot wan links and ip

Part 1 Configure, verify and troubleshoot WAN links and IP services Answer to all questions below: 1. What is the name of the Safe Work Australia code of practise that provides guidance on how to manage the risks of elec ...

This is your second design assignment this assignment

This is your second design assignment. This assignment requires you to design a complex state machine. You are designing a digital alarm clock. There are various designs you can attempt. More complex designs are worth mo ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Other Engineering Expert