Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Other Engineering Expert

Telecommunications Homework

 

Commonly used units used to describe electrical quantities. Use the correct units you're your answers.

 

Unit Scale

n

Nanometer / nanohertz / nanofarad

.000 000 001 = 10-9

µ

Micrometer / Microhertz/ microfarad / microhenry

.000 001 = 10-6

m

Millimeter / millihertz / millifarad / milliohm / milliheny

.001 = 10-3

Unit

Meter / Hertz / Farad

1

k

Kilometer/ kilohertz/ kilohm

1 000 = 103

M

Megameter / megahertz/ megaohm

1 000 000 = 106

G

Gigameter / Gigahertzg

1 000 000 000 = 109

 

Also helpful

 

AB*AC = AB+C

 

For example

 

103 * 10-6 = 10-3 = 1/103

 

m * k = unit (10-3 * 103 = 1)

 

10 kHz * 27 µF = 10 * 103 Hz * 27 * 10-6 F = 10*27*103*10-6 Hz * F= 270 * 10-3 1/?

 

= 270 * 1/103 1/= 270 * 1/(103 ?) = 270 * 1/(k?)

 

So if we were looking for a resistance (note: this is similar to finding impedance in that it is the correct unit, but wrong in that we are ignoring 2π), 1/(270 * 1/(k?)) = .0037 k?

 

Question #1

 

A sine wave generator has an output waveform v(t) = 10 cos ( 200 π t) volts

 

a. What is the amplitude of the sine wave?
b. What is the frequency of the sine wave?
c. What is the rms voltage of the generator output?

 

Question #2

 

A sine wave generator has an output waveform v(t) = 10 cos ( 200 π t).

 

a. A second sine wave generator has an output waveform v(t) = 10 cos ( 200 π t + π / 2 ).

 

What is the relative phase angle between the waveforms of the two generators?

 

Give you answer in radians and degrees.

 

b. The trig identity cos (A + B) = cos A cosB - sin A sin B is useful in telecommunications.

 

Expand the equation v(t) = 10 cos ( 200 π t + π / 2 ) using this identity, where A = 200 π t and B = π / 2.

 

Question #3

 

An FM broadcast station transmits music at a frequency of 91.7 MHz.

 

a. What form of modulation is transmitted?
b. Which parameter of the transmitted signal is varied by the audio signal?
c. What is the wavelength of the transmitted signal?

 

Question #4

 

a. What is the approximate range of frequencies that can be heard by the human ear?
b. What is the range of frequencies sent over a wire line telephone connection?
c. What is the bandwidth of an analog (NTSC) television video signal? (Note with the advent of digital TV broadcasting analog NTSC broadcast signals are now obsolete.)

 

Question #5

 

A square wave has amplitude 0 volts and 1.0 volts, and a period of 0.5 ms.

 

a. What is the frequency of the square wave?
b. What is the fundamental frequency of the spectrum of the square wave?
c. What is the magnitude of the fundamental frequency component of the spectrum of the square wave?
d. The square wave is passed through an ideal rectangular low pass filter that completely attenuates all frequencies higher than 3 kHz. What is the spectrum at the output of the filter?

 

Question #6

 

a. What is the unit of capacitance?
b. What is the unit of inductance?
c. What is impedance of a 1 μF capacitor at a frequency of 10 kHz?
d. What is the impedance of a 1 mH inductor at a frequency of 10 kHz?

 

Question #7

 

In the United States, residential mains power is nominally 120V rms at 60 Hz.

 

a. What is the peak voltage?
b. What is the rms current that would flow through a 100W incandescent light bulb (of happy memory!)?
c. You replace the incandescent bulb with an LED lighting fixture that creates the equivalent amount of light but consumes only 23 watts. What is its rms current of the LED fixture?

 

Question #8

 

A 1 kΩ resistor is in series with a 1 μF capacitor.

 

a. What is the RC time constant of the resistor - capacitor pair?

 

b. The 1 μF capacitor is charged from a 10 volt battery via the 1 kΩ resistor.

 

How long does it take for the voltage on the capacitor to reach 6.3 volts?

 

c. The 1 μF capacitor is charged from a 10 volt battery via the 1 kΩ resistor.

 

What is the voltage on the capacitor after one second?

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91950420
  • Price:- $45

Priced at Now at $45, Verified Solution

Have any Question?


Related Questions in Other Engineering

1 online discussion forum - post your proposed topic and

1. Online Discussion forum - Post your proposed topic and chosen data set as well as a short plan for the project. This is required for approval of the topic. As discussed, students must select unique topics, therefore i ...

Engineering analysis homework -for every problem provide

Engineering Analysis Homework - For every problem, provide The MATLAB script/function files that solve the problems. Problem 1: Write a script that solves the problem. For (c), show results of the evaluation of every ind ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Assignment 11 what is the purpose of ore reserve and

ASSIGNMENT 1 1. What is the purpose of ore reserve and resource estimation? Why are resource and reserve estimates important to the mining industry? 2. What is meant by ore? What is meant by the term waste? How is the di ...

Load fault level analysis amp protection design of a remote

LOAD, FAULT LEVEL ANALYSIS & PROTECTION DESIGN OF A REMOTE AREA MICROGRID Assignment Please undertake the following analyses: 1. Calculate the 3-phase fault levels on Bus 2, Bus 3 and Bus 4 with the main supply connected ...

Assessment practical reportproduce a short technical report

Assessment: Practical Report Produce a short technical report in a form consistent with proteomic journals covering the techniques, results and interpretation of your proteomics experiment in the practical classes. The r ...

Q 1a discontinuity is found fully developed from the toe to

Q. 1 A discontinuity is found fully developed from the toe to the bench surface on a 15 m high slope, slope angle 65°. The discontinuity (frictional angle 32° and cohesion 20 kN/m2) is planar and its strike is parallel t ...

This is your second design assignment this assignment

This is your second design assignment. This assignment requires you to design a complex state machine. You are designing a digital alarm clock. There are various designs you can attempt. More complex designs are worth mo ...

Assignment 11 what is the purpose of ore reserve and

ASSIGNMENT 1 1. What is the purpose of ore reserve and resource estimation? Why are resource and reserve estimates important to the mining industry? 2. What is meant by ore? What is meant by the term waste? How is the di ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As