Ask Other Engineering Expert

Task:To identify, research, and present (in both written and oral formats) a topic in engineering that is currently the focus of ongoing (within the past 5 years) research, investigation, and/or development The topic must come from the National Academy of Engineering (Nan) Grand Challenges for Engineering:

Rationale Technology is developing at a rapid pace: computers are advancing at astonishing rates, new energy sources are in the development phase, crushing transportation issues require solutions, and new manufacturing methods are revolutionizing consumer products. Asa professional engineer, you will need to continually educate yourself about advances in technologies to reain competitive, and this project introduces important information literacy skits to aid M your ability to educate yourseff Thims project also shows different ways of defining and solving complex problems depending on the perspective of the team.

Process

1. Read about the NAE Grand Challenges of Engineering and select Ichallenge to research using the library database Compendex (Engineering Village)-see HWO6 for details, and remember Mat you cannot select the Grand Challenge "Provide Access to Clean Water° (Mary, the librarian, used this challenge as the topic for the library Session).

2. During your research, select 2 joumal artides and/or conference papers Mat approach the challenge using different strategies. The journal articles/conference papers should be closely related (similar specific tonics).

3. Read the articles and take notes, specifically look problem identification, proposed solution, methods, data, conclusions, and/or future work identified in both articles/papers.

4. Write a short compere end contrast paper (you are NOT summarizing the articles/papers) informing the audience how the authors began to solve the complex problem stated within the NAE Grand Challenge, again focusing on problem identification, proposed solution, methods, data conclusions, and/or future work.

5. Repeat the process of selecting and researching a Grand Challenge for Memo 02 and the Presentation (note: this portion of the project is later in the semester).

Content of Submissions (both written and oral):

1. Briefly, describe the NAE Grand Challenge, focusing on the need for this research or development.

2. Compare and Contrast the approaches presented in your sources (problem identification, proposed solution, methods, data, conclusions, and/or future work).

3. Identify your sources with properly formatted citations. A minimum of 3 sources are required, 2 must be the Mumal articles/conference papers. The third reference may be the NAE Grand Challenges website additional sources (but not Wikipedia) may be used in your brief description of the Grand Challenge. You must use the IEEE citation style.

Written Format Requirements: Prepare a                  Oral Format Requirements: Prepare and practice.

compare/contrast paper,                                                        dress well

  • 500 to 600 words 4 to 5 minutes (m substantial videos)
  • 1" margins must be prepared using PowerPoint
  • double spaced must be submitted by midnight the night prior
  • font:12 pt. Times New Roman or 11 pt. Calibri (submission link will close)
  • include graphics graphics are required

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91803425
  • Price:- $40

Priced at Now at $40, Verified Solution

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As