Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Other Engineering Expert

Question: A mobile phone communicates to a base station (BS) of a cellular system through a dedicated wireless link having the following characteristics:

- The data channel has a constant bit error probability of Pbit= 5 10-4.

- Each link layer PDU has a size of L = 366 bits, including data, LD = 350 bits, and header, LO = 16 bits, fields.

- The round-trip time at the data link layer - the time taken between the beginning of the transmission of a PDU and the complete reception of the related ACK message, is RTT = 200 ms. tA and propagation delay τp are negligible.

- Link layer PDUs are transmitted at the constant rate Rb = 256 kbit/s.

a) Calculate the throughput expressed in terms of useful data bits transmitted per second for SW-ARQ and SR-ARQ. Why is SW-ARQ so inefficient?

b) Now, consider the following hybrid ARQ (HARQ) scheme. Each PDU is split into K = 6 data blocks of the same size and prior to its transmission is sent to an encoder, which returns an encoded PDU of N data blocks. Encoded PDUs are thus sent over the channel using SR-ARQ. At the receiver, up toN - K erroneous blocks of data can be corrected, in any order, for any PDU. Thus, if a PDU is received with a number of erroneous blocks smaller than or equal to N - K, the corresponding original K-block PDU is recovered with no need for further retransmissions. Otherwise, the PDU is deemed to be failed and a negative acknowledgment is sent to the transmitter, requesting the retransmission of this PDU (of the corresponding N blocks of data). Calculate the throughput (useful data bits per second) of this HARQ scheme for N = 7 and N = 8 and compare the results with those obtained for SR-ARQ.

c) Consider SR-ARQ and the SR-HARQ of the previous point. Let Pf (ARQ) and Pf (HARQ) be the error probabilities for a plain link layer PDU (ARQ) and an encoded PDU (HARQ), respectively. Define Ps(ARQ) = 1 - Pf (ARQ) and Ps(HARQ) = 1 - Pf (HARQ). Referring to ηSR-ARQ and ηSR-HARQ as the throughput of ARQ and HARQ, respectively, say when the following inequality ηSR-HARQ > ηSR-ARQ holds as a function of K, N, Ps(ARQ) and Ps(HARQ).

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M92759300

Have any Question?


Related Questions in Other Engineering

Question - show that the zero-point energy of a simple

Question - Show that the zero-point energy of a simple harmonic oscillator does not contribute to its entropy or heat capacity, but does contribute to its energy and Helmholtz function.

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Load fault level analysis amp protection design of a remote

LOAD, FAULT LEVEL ANALYSIS & PROTECTION DESIGN OF A REMOTE AREA MICROGRID Assignment Please undertake the following analyses: 1. Calculate the 3-phase fault levels on Bus 2, Bus 3 and Bus 4 with the main supply connected ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Homework - risk and decision management1 you are working

Homework - Risk and Decision Management 1) You are working program X. The total budget allocated to the program is $100 M and it is to be completed in 24 mo. range (R) and passenger capacity (C) are two key performance p ...

Introduction to engineering design assignment -

Introduction to Engineering Design Assignment - Drafting Question 1 - Field notes and traverse drawing may be an outdated form of keeping and presenting information on the position of features on a site. Modern electroni ...

Mine safety amp environmental engineeringpart 1 questions1

Mine Safety & Environmental Engineering Part 1. Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the following terms ...

Assessment practical reportproduce a short technical report

Assessment: Practical Report Produce a short technical report in a form consistent with proteomic journals covering the techniques, results and interpretation of your proteomics experiment in the practical classes. The r ...

Mine safety amp environmental engineeringpart 1 questions1

Mine Safety & Environmental Engineering Part 1. Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the following terms ...

Conceptual design of forced-free-mixed convection

Conceptual Design of Forced-Free-Mixed Convection Experiment This assessment is to be completed individually. 1. Learning Outcomes: - Develop a basic ability to conceptually design an experimental apparatus - Use theory ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As