Problem1 write a c program to find two prime numbers that, Ask an Expert

Engineering

Problem

1. Write a C program to find two prime numbers that are closest to but larger than 10000 and also two prime numbers that are closest to but smaller than 10000.

2. Write a C program to flash the LEDs on your demo board with the following pattern (use port B in SSE452 and use port D in SSE8720 or SSE8680j:

1. Turn on all LEDs for a quarter second and turn them off for a quarter second.

2. Repeat Step 1 three more times.

3. Turn on one LED (at odd position) at a time from left to right with each LED turned on for half a second.

4. Repeat Step 3 three more times.

5. Turn on one LED (at even position) at a time from right to left with each LED turned on for a quarter second.

6. Repeat Step 5 three more times.

7. Turn on LEDs driven by pins RB4 and RB3 on and off twice. The on time and off time are both a quarter second.

8. Turn on LEDs driven by pins RB5 and RB2 on and off twice. The on time and off time are both half a second.

9. Turn on LEDs driven by pins RB6 and RBI on and off twice. The on time and off time are both half a second.

10. Turn on LEDs driven by pins RB7 and RBO on and off twice. The on time and off time are both a quarter second.

View complete question

Other Engineering, Engineering

Category:- Other Engineering
Reference No.:- M92701367

Have any Question?Write your Review or question?

Related Questions in Other Engineering

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

Load fault level analysis amp protection design of a remote

LOAD, FAULT LEVEL ANALYSIS & PROTECTION DESIGN OF A REMOTE AREA MICROGRID Assignment Please undertake the following analyses: 1. Calculate the 3-phase fault levels on Bus 2, Bus 3 and Bus 4 with the main supply connected ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Homework - risk and decision management1 you are working

Homework - Risk and Decision Management 1) You are working program X. The total budget allocated to the program is $100 M and it is to be completed in 24 mo. range (R) and passenger capacity (C) are two key performance p ...

Q 1a discontinuity is found fully developed from the toe to

Q. 1 A discontinuity is found fully developed from the toe to the bench surface on a 15 m high slope, slope angle 65°. The discontinuity (frictional angle 32° and cohesion 20 kN/m2) is planar and its strike is parallel t ...

Engineering analysis assignment -for every problem provide

Engineering Analysis Assignment - For every problem, provide The MATLAB script/function files that solve the problems. Problem 1: Plot the function f(t) = (x+5) 2 /(4+3x 2 ) for -3 ≤ x ≤ 5. using plot command. Use the ar ...

Question - show that the zero-point energy of a simple

Question - Show that the zero-point energy of a simple harmonic oscillator does not contribute to its entropy or heat capacity, but does contribute to its energy and Helmholtz function.

Mine safety amp environmental engineeringpart 1 questions1

Mine Safety & Environmental Engineering Part 1. Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the following terms ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Other Engineering Expert