Ask Other Engineering Expert

Portfolio Assignment -

Field Report - Ballarat

Melbourne students will complete the following questions based on their field trip to Ballarat. Perth students will complete the questions based on their field trip to the IROC centre.

Question 1 -

a) What was the most dangerous activity that you undertook during the field trip? The field trip commenced when you gathered in the foyer of the building and signed the attendance sheet. The field trip was completed when you disembarked the bus in Melbourne.

b) Identify the hazards associated with your chosen activity? Justify the hazards you have identified by researching how many people have suffered injuries due to these hazards. Use reliable sources and provide references using the CQU Harvard referencing style guide.

c) Identify controls for the hazards associated with this activity. Using the hierarchy of controls rate your controls from 1 to 5, where 1 represents personal protective equipment and 5 represents elimination of the hazard.

Question 2 -

Write a summary of the geology that describes the formation of the Ballarat goldfields. Your summary should include a description of alluvial deposits, the formation of turbidites and the formation of deep leads. You should also make mention of the gold bearing host rock and how the gold migrated.

Questions 3 -

Describe three different mining systems that have been used to mine gold in the Ballarat region.

How were the alluvial deposits mined in the early gold rush days of Victoria?

How was gold mined from the deep leads using steam power?

How is gold mined in Ballarat today?

Field Report - PERTH BHP IROC VISIT

Perth Students will complete the questions based on their field trip to the IROC centre.

Question 1 -

a) What was the most dangerous activity that you undertook during the field trip? The field trip commenced when you gathered in the foyer of the building and signed the attendance sheet. The field trip was completed when you returned to CQU.

b) Identify the hazards associated with your chosen activity? Justify the hazards you have identified by researching how many people have suffered injuries due to these hazards. Use reliable sources and provide references using the CQU Harvard referencing style guide.

c) Identify controls for the hazards associated with this activity. Using the hierarchy of controls rate your controls from 1 to 5, where 1 represents personal protective equipment and 5 represents elimination of the hazard.

Question 2 -

Write a summary of the geology that describes the formation of the Pilbara iron ore deposits. Your summary should include a description of when the deposits formed, the formation of banded iron deposits and the role of microbes in the formation of these deposits.

Questions 3 -

Describe the purpose of the IROC centre in Perth.

What operations does the IROC centre control?

Why did BHP decide to build an IROC centre in Perth?

Summarise the major mining and processing methods used for iron ore production?

What new hazards and workplace issues are associated with this new mining system?

Attachment:- Assignment File.rar

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M92840604
  • Price:- $130

Guranteed 48 Hours Delivery, In Price:- $130

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As