Ask Other Engineering Expert

Part -1:

1. If 8000m3/d of wastewater from an industry has a BOD5 of 190 mg/L and k = 0.17 per day (base 10)

a. How much oxygen (kg/day) is required to satisfy the BOD demand of this waste, assuming 1 kg of oxygen is to be supplied per kilogram of the ultimate BOD in the waste

b. What is the population equivalent of the waste (based on BOD5)

2. A 5000-m3/day wastewater plant discharges to a river with a minimum drought flow of 137.7 m3/min (immediately upstream from the outfall)

a. What total allowable BOD5 (kg/day) could be discharged in the river after initial dilution must not exceed 1 mg/L and no upstream pollution is occurring?

b. What degree of treatment (% BOD satisfied) does this represent, assuming the plant influent to have a BOD5 of 250 mg/L

3. During recent winters there has been considerable criticism of the practice of dumping salt-laden snow from the streets into rivers and lakes for disposal. What problems are caused by this? (minimum of 4) Should the practice be prohibited? What alternatives are available? How would they resolve these problems

4. Calculate the surface area and depth of an "ideal" settling tank to remove all 10um spherical particles (SG = 2.65) from 1000 m3 of wastewater per day and provide a detention time of at least 1 Hr

5. From the information given, wastewater is made up of many different constituents, which one in your opinion creates the greatest risks to human habitation? Natural habitation? Which ones are reasonably inert? Is treatment the only way to prevent these elements from entering the wastewater stream?

Part 2:

1. Discuss methods that can allow you personally to reduce water consumption. Does individual consumption rates for a community compare to industrial uses?

2. Desalination seems to be the key to unlocking the vast supply of ocean water for our use. Explain, why it is unlikely that desalination - even if costs can be brought down to those of most municipal water supplies, will ever be widely used in irrigation, the world's most common water use. Note that seawater contains between 18,000 to 35,000 mg/L of salt

3. Water has unique properties that are different from those of any other liquid. It is the universal solvent and has a high heat capacity, high heat of vaporization, a large temperature difference between its boiling point and its freezing points and a maximum density at 4 degrees C. Explain how these 5 characteristics are important in our environment?

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M9861517
  • Price:- $60

Priced at Now at $60, Verified Solution

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As