Ask Other Engineering Expert

Management of Natural and Environmental Hazards

Summary

To complete a proposal for funds to undertake a project to reduce the risks posed by natural hazard(s) in a chosen region.

Detailed coursework guidance

You are to write an application for funds to implement a NATURAL HAZARD RISK REDUCTION PROJECT in a place, region or country of your choice. This will consist of completing the application form template (attached). An application receiving high grades will (this list is not exhaustive):

- Choose a region that experiences hazards and develop a project that is likely to reduce the impact of this hazard. JUST ONE HAZARD.
- Utilise terms, definitions and concepts that are presented throughout the module this week; these may include ‘hazard', ‘resilience', ‘sustainability', ‘climate change', ‘early warning' or ‘preparedness'.
- Present concrete information, case-studies and/or data to back-up both the need for the project and its potential to be successful.
- Engage somewhat with contemporary academic literature to demonstrate an understanding of relevant themes in related disciplines.

The form itself is on pages 5-7 of this brief

Suggested Procedure:

a) Choose a place, region or country that is exposed to multiple hazards. Understand the nature of the hazards in this chosen region e.g. their frequency, magnitude, interrelatedness or compounding factors and understand the vulnerability of the population. A thorough risk assessment is essential.

b) Then research:
i. Current international and national strategies that emphasise the importance of sustainable risk reduction and hazard mitigation (both generic and also focusing on your chosen hazard).
ii. Techniques of hazard mitigation that would be appropriate for your chosen region. You should consider social/cultural issues, hard-engineering solutions and softer alternatives. Bear in mind future influences as a result of possible environmental change.

c) Now, choose one of the natural hazards experienced in your region and understand how it poses a risk there e.g. to building and construction practices, water management, critical infrastructure, health services, transport, poverty etc. You may wish to investigate some of the following:
i. What precisely are the risks posed to such systems in place?
ii. How and where vulnerability and resilience are manifest in such systems both there and elsewhere - look for a few good case studies.
iii. How risk assessments for your particular natural hazard may be undertaken in your chosen region, and how such risks have been reduced elsewhere.
iv. Are technical or ‘social' approaches the most appropriate?
v. How you can ensure sustainability for the project and is it environmentally appropriate for the region in question?
vi. By mitigating risk for one hazard do we increase exposure to others?
vii. Will disaster warning and response systems be considered?
viii. Will a changing environment affect the risks in that region?
ix. Do the locals need to be involved in any consultation?

d) You are now in a position to identify the partners in your application: "experts" who can provide knowledge and skills during the project; usually they will have a proven track record. You will need to undertake research into NGOs, charities, government institutions etc.

e) Develop a rough structure/mental picture of your project. Read the links provided on Moodle about writing a Grant Proposal Writing and Project Management.

f) . It is expected that you will make extensive use of the course handouts and "Moodle material" in your coursework to demonstrate your guided reading and ability to synthesise and apply information introduced during the taught element.

g) Reference widely and correctly!

h) Consult various sources (linked to on Moodle) for tips on writing research proposals.

i) Complete the application form using this information, and submit it via Moodle.

Attachment:- COURSEWORK.rar

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M92787149
  • Price:- $160

Guranteed 48 Hours Delivery, In Price:- $160

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As