Ask Other Engineering Expert

Investigation of corrosion in steel General purpose cement. Why we investigating it, Induce a certain crack and observe what may happen?

Fly Ash

It is a by-product of coal combustion in power stations. It also provide environmental advantages. Overall performance and quality of concrete. It affects the plastic properties of concrete by improving workability, reducing water demand, controlling bleeding, and lowering heat of hydration. Fly ash increases strength development at later ages, reduces corrosion of reinforcing steel, and generally improves resistance to chemical attack and mobility through a reduction in permeability.

Grade 1 Fly Ash

It is a supplementary cementitiious material that delivers improved later-age strength, workability and enhances the durability properties of concrete. Commonly used as 20%-30% cement replacement in concrete. Grade 1 Fly ash is used as a single product or may be blended to produce a Fly Ash blended cement. Grade 1 Fly Ash is recommended for use in virtually in conventional concrete applications

Special Grad Ash

Its an Ultra fine high performance fly ash product that both increases the density and reduces the permeability of concrete by providing a filler effect and a reactive cementitious material. It is particularly effective for providing water tightness in higher strength and high durability applications.

Minutes with AdilAbbas( Major Stake holder) (3/05/16)

I am having regular meeting with Adil Abbas who is the major stake holder of this project.  We have discussed few key points during the meeting and they are:

-Look for risk plan

-Look for standards- Australian standards quality and prepare client brief

-Quality management plan

  • Consistency of result-Document work procedure
  • Report parameters
  • Work performed
  • Documents and presentation

-All aspects of the project is free from mistakes

-Australian standard-recovery procedure

-Why Corrosion is a problem?

-Documenting the notes and put it into report as appendix. it has to be part of quality plan organising meeting with Adil, documents it with quality plan

-Risk assessment-making sure I keep an electronic copy. what if i loose the hardcopy? I need to have a backup

-Specification of blended cement-Australian standard

-Australian standard of general purpose cement

-Australian standard of blended cement

Minutes with AdilAbbas( Major Stake holder) (10/05/16)

Concentrated salt solution.

Normal concrete.

add fly ash to cement

after 7 days keep them for 14 days, put them into salt solution and check how much is it corroded?

Research on slag

Work on risk register

Work on quality management plan

Work on Australian standard- method of testing corrosion

Minutes with AdilAbbas( Major Stake holder) (17/05/16)

Find out how much cement, water, how much concrete.

Slum, water cement ratio

Go to companies and find out.

Experiment1 beam with normal cement

Another 1 partly replace slag and lime

Prepare concrete cylinder..

look for method for testing compressive strength for concrete.

Blended cement composition. Australian standard will tell composition of slag material which you add that will help determining the mix proportion

Decide how much material do I need?

Prepare at least  3 compositions

  • Plane
  • Limestone and slag
  • cement and slag.

What slum you want. It is important to determine the water cement ratio?

What mix proportion do I need

Minutes with AdilAbbas( Major Stake holder) (01/06/16)

I had a brief discussion regarding the experiment that I have to carry out. Adil Abbas has asked me to go to library and suggested me to look for the Australian standard website in order to find the standards. I was asked by Adil to work on water cement ratio, compression test.

With the water cement ratio he has given me 3 types. 1st one is water cement ratio of 0.40. 2nd one is water cement ratio of 0.50 and the 3rd one is 0.60.

I was told by Adil that the water cement ratio for casting slump would be 80 to 100mm, if in any case I can't get it then I have to use chemical plasticizer.

2000 words + diagrams and calculations.

Assignment link - https://www.dropbox.com/s/pewqshz7oylv26w/Assignment.rar?dl=0.

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91929986

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As