Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Other Engineering Expert

problem 1) Enumerate the types of oil well drilling rigs and describe the CIRCULATORY or ROTARY system in detail with neat diagrams.

problem 2)a) Give the functions of drilling muds and add a note an oil-base muds.

b) describe PDC bits.

problem 3) Describe with neat diagrams how formation characteristics play role in hole deviation.

problem 4) prepare detail note on types of directional wells and requirements of their survey.

problem 5) prepare notes on the following:

a) Well planning objective.

b) Drill collars and their uses.

c) Dog leg in directional wells.

d) Plastic viscosity and yield point of drilling mud.

e) Jack-up rig.

problem 6) Name different fishing tools and describe the tools used for fishing pipes.

problem 7) Describe differential pipe-sticking.

problem 8)a) describe the open-hole completion method with its advantages and disadvantages.

b) What are packers? List the different packers and give the advantages of retrievable packers.

problem 9) prepare notes on the following:

a) Surface indications of a well-kick.

b) Perforations.

c) Squeeze cementing & it’s uses.

d) Lost circulation materials.

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M95336

Have any Question? 


Related Questions in Other Engineering

Q1 a hollow circular mild steel column of external diameter

Q1. A hollow circular mild steel column of external diameter 300 mm and internal diameter of 250 mm carries an axial load of 1500 kN. a) Determine the compressive stress in the column. b) If the initial length of the col ...

Assignmentradio frequency applications and

Assignment Radio Frequency Applications and Feedback Directions: Please answer BOTH of the questions and respond to a minimum of two of your classmates. Question A Discuss some important op amp parameters needed for radi ...

Electronics lab transistor biasingdiscuss what transistor

Electronics Lab: Transistor Biasing Discuss what "transistor biasing" means and its importance to transistor circuit design. Choose one type of biasing, and explain either how it works or its advantages and disadvantages ...

Assignment automated teller machine atmon an automated

Assignment: Automated Teller Machine (ATM) On an automated teller machine (ATM), the customer is identified by inserting a plastic ATM card with a magnetic stripe or a plastic smart card with a chip that contains a uniqu ...

1the emf of a generator of 377 ohm internal impedance is a

1. The EMF of a generator of 377 ohm internal impedance is a 2 ps long pulse of 12 volt amplitude. The generator drives a 10km long section of transmission line of 377 ohm characteristic impedance and 3 x 10 8 m/s propag ...

Design a voltage-divider biased common source amplifier

Design a voltage-divider biased common source amplifier with no bypass(JFET) Design a voltage-divider biased common source amplifier with no bypass to the following specifications: Av (overall) = -3, Rsrc = 30 kΩ, Rin = ...

C project reportsi have two c program i need one reports

C++ Project Reports I have two C++ program i need one reports for ech one of the and i wnat them to be tn the same format in the instruction if there some the thing not right i will not accept it. The two must be diferen ...

Project proposal -objectives to get more familiar with the

Project Proposal - Objectives: To get more familiar with the Hadoop Ecosystem (Spark specifically) and Scala Programming. Resources: Files of tweets about election Project Topic: The election of 2016 seems to be a very c ...

1 purposethe primary purpose of this project is to help you

1. Purpose The primary purpose of this project is to help you understand the pipelining process for a simple set of MIPS instructions. You will gain experience with basic pipelining principles, as well as the hazard cont ...

Robotics assignment-investigation into the control of an

Robotics Assignment- Investigation into the control of an electric motor using MatLab. An electric motor can be described by  the following two coupled second order differential equations, see the PowerPoint notes for a ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

WalMart Identification of theory and critical discussion

Drawing on the prescribed text and/or relevant academic literature, produce a paper which discusses the nature of group

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro