Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Other Engineering Expert

Engineering


Home >> Other Engineering

Description of the Diet Problem
The goal of the diet problem is to find an ”optimal” combination of foods that will satisfy all the daily nutritional requirements of an individual. The problem can be formulated as a linear program with an objective and constraints which require that daily nutritional needs be satisfied. We include constraints that regulate the number of calories and amounts of vitamins, minerals, fats, sodium and cholesterol in the diet.
The original mathematical formulation is simple, but you will find out (from Dantzig’s article) by running the simple model, the diet returns is far from optimal. While our nutritional requirements can be met, there is serious concerns for taste and variety. As Dantzig’s diet problem illustrates, we would never drink gallons of vinegar nor include a few boullion cubes in our meals. However, with careful design of the linear/integer program, healthy optimal meals have been created very successfully.
Formulate the diet problem for your own:
• Select a variety of 100 favorite types of food that you would eat. Do not use any fastfood or pre- processed food. Hence, a sandwich will consist of bread and ham, or peanut butter, jelly, etc. If bread is chosen in the solution, then, ham/peanut butter and jelly will also be chosen, etc.
• UsingthenutritioninformationfromUSDepartmentofAgriculturehttp://www.nal.usda.gov/fnic/foodcomp/ to determine the nutritional value and cost (per serving size) of each of the food you select.
• Generate the AMPL data file.
• Select an objective of your choice.
• Formulate a linear/integer program using AMPL so that the feasible solutions give you the food combination that satisfies the daily nutritional needs for a healthy individual.
• Solve the linear program in CPLEX and LINDO and interpret the results.

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M9515885

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

This is your second design assignment this assignment

This is your second design assignment. This assignment requires you to design a complex state machine. You are designing a digital alarm clock. There are various designs you can attempt. More complex designs are worth mo ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Conceptual design of forced-free-mixed convection

Conceptual Design of Forced-Free-Mixed Convection Experiment This assessment is to be completed individually. 1. Learning Outcomes: - Develop a basic ability to conceptually design an experimental apparatus - Use theory ...

Engineering analysis assignment -for every problem provide

Engineering Analysis Assignment - For every problem, provide The MATLAB script/function files that solve the problems. Problem 1: Plot the function f(t) = (x+5) 2 /(4+3x 2 ) for -3 ≤ x ≤ 5. using plot command. Use the ar ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

Introduction to engineering design assignment -

Introduction to Engineering Design Assignment - Drafting Question 1 - Field notes and traverse drawing may be an outdated form of keeping and presenting information on the position of features on a site. Modern electroni ...

Load fault level analysis amp protection design of a remote

LOAD, FAULT LEVEL ANALYSIS & PROTECTION DESIGN OF A REMOTE AREA MICROGRID Assignment Please undertake the following analyses: 1. Calculate the 3-phase fault levels on Bus 2, Bus 3 and Bus 4 with the main supply connected ...

Design a five bit signed Design a five bit signed comparator.

Design a five bit signed comparator.

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As

Follow Us

© Copyright 2013-14 mywordsolution.com All rights reserved