Ask Question, Ask an Expert


Ask Other Engineering Expert

1. Describe the relationship and differences between substitutional and interstitial solid solution?

2. What do you mean by cooling curve? Describe how does time temperature cooling curve of the alloy of eutectic composition different from that of a pure metal?

3. Describe in detail:

1) Eutectic reaction

2) Eutectoid reaction

3) Peritectic reaction

4) Peritectoid reaction

4. Sketch Iron -Carbide equilibrium diagram and mark on it all important temperature and composition fields.

5. Elements A and B melt at 7000°C and 10000°C respectively. Sketch a typical isomorphous phase diagram between the elements A and B.

6. Elements A and B melt at 7000° C and 10000° C respectively. They form a eutectic at 35%A at temperature 5000°C. Sketch a typical phase diagram between A and B.

7. Metal A has melting point at 10000°C . Metal B has melting point of 5000°C. Sketch one phase diagram (between elements A and B) for each of the following conditions.

(i) Two elements demonstrate unlimited solid solubility.

(ii) Alloy systems illustrate formation of two terminal solid solution and a eutectic point at 50%A and at7000°C.

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M912024

Have any Question? 

Related Questions in Other Engineering

Proposed max light rail projecttask listyour team has been

Proposed Max Light Rail Project Task List Your team has been asked to determine what a one way ticket price needs to be set to, in order to be able to break even at the end of a 50 year time frame. To help you to provide ...

Lab exercise electronics principleszener regulatorsin this

Lab Exercise: Electronics Principles Zener Regulators In this lab you will construct a regulated DC power supply. You will observe the behavior of the circuit as a function of load current. Equipment 1. Transformer 2. Os ...

- all work is to be submitted as a single pdf document

- All work is to be submitted as a SINGLE pdf document report. Your document should contain all the MATLAB script (including comments), the solutions generate by MATLAB, and graphs that you were asked to produce. You MUS ...

Procurement reportthis 2000 word report should describe and

Procurement Report This 2000 word report should describe and analyse the positive and negative aspects of three different procurement methods for construction projects. Benefits and problems for the client/developer, the ...

Process systems and applications - principles of flow

Process Systems and Applications - Principles of Flow Measurement and Process control Assignment: Counter-gravity Slurry Flow Measurement and Auto-control System The objectives of the project are to create a solid mass f ...

Digital systems design with programmable logic springbarrel

Digital Systems Design with Programmable Logic Spring Barrel shifter is used in most of the high performance computing system where low latency is needed for shift operations for any amount. The diagram of a barrel shift ...

Nbspgiven dimensions in mmfor pulley a consider the loose

GIVEN : Dimensions in mm For Pulley A consider the loose belt tension to be 15% of the tension on the tight side. Find : Location of critical section in the shaft.

Strain gauge measurementsafety your demonstrator acts as

Strain Gauge Measurement Safety: Your demonstrator acts as your safety warden. Follow all instructions given by your demonstrator. If the evacuation siren sounds leave your bags and follow the instructions of your demons ...

Engineer management case studyquestionafter watching the

Engineer management case study Question: After watching the lecture and reading the textbook on Requirements, your assignment is to come up with a list of questions to be used in an interview you will do with a new custo ...

Process control assignment case study - reactor-flash

Process Control Assignment Case Study - Reactor-Flash unit In this assignment you will apply the principles of control to a specific case study-a reactor/flash unit polymerisation plant with recycle.  In the first assign ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

A cola-dispensing machine is set to dispense 9 ounces of

A cola-dispensing machine is set to dispense 9 ounces of cola per cup, with a standard deviation of 1.0 ounce. The manuf

What is marketingbullwhat is marketing think back to your

What is Marketing? • "What is marketing"? Think back to your impressions before you started this class versus how you

Question -your client david smith runs a small it

QUESTION - Your client, David Smith runs a small IT consulting business specialising in computer software and techno

Inspection of a random sample of 22 aircraft showed that 15

Inspection of a random sample of 22 aircraft showed that 15 needed repairs to fix a wiring problem that might compromise

Effective hrmquestionhow can an effective hrm system help

Effective HRM Question How can an effective HRM system help facilitate the achievement of an organization's strate