Ask Other Engineering Expert

Assignment

In Session 3 you learned how to use the PsycARTICLES database. This will be your research resource for this assignment, in which you will review recent research literature in the domain of personality. This assignment was previously outlined in Session 11, so you have had some time to work on it prior to this week.

An annotated bibliography is a paper in which you list and summarizes several sources on a specific topic. For this assignment you will select a personality trait from the list below. You will then search for five articles on this topic within the PsycARTICLES database; all articles must have been published within the last five years. Within your paper you will list each of your five articles using a properly-formatted APA citation, and for each article you will provide a 150-250 word summary that outlines the following:
The specific topic of the article.

The rationale for the research, i.e. why did the researchers do this (to test a theory, to fill in a gap, to replicate previous research, to advance a better therapeutic practice, etc.)

A general description of the people who were studied in the research (e.g. age, sex, etc)
A general description of the methods used

A summary of the general conclusions drawn by the researchers

NOTE: You are not expected to summarize the statistical results; that goes beyond the level of an Intro Psych class You may select from the following list of personality traits:

  • Aggression
  • Agreeableness
  • Compassion
  • Confidence
  • Empathy
  • Extraversion
  • Generosity
  • Impulsivity
  • Introversion
  • Loyalty
  • Negativity
  • Neuroticism
  • Obsessiveness
  • Openness
  • Positivity
  • Resilience
  • Sensation seeking
  • Spirituality

Be aware that some of these will have more research than others. Ideally, you should choose a topic that generates many search results from PsycARTICLES, so that you can scan through for articles that are interesting and which you can understand sufficiently well to be able to summarize within your paper.

Your paper should begin with a title page (within the same document as the paper) listing your name, class section, professor's name and the date, and the personality trait you chose to study. Then, on the next page you should begin the bibliography: list the APA citation for your first source, followed by your summary; then, proceed to the second, third, fourth, and fifth citations. A very generic sample paper is attached below, along with links to sources of further reading about annotated bibliographies.

The emphasis in this paper is demonstrating understanding of the material, as summarized in your own words. You may use direct quotes if they are very short and clearly cited within quotation marks, but you should not use longer block quotes.

The paper should be formatted as follows:

The paper should be double-spaced, no more than 12 point font, preferably Times New Roman or Calibri. Do NOT use Courier font. Margins should be no more than 1.25 inches all around.

The paper must be submitted in Microsoft Word .DOC format or Microsoft Word .DOCX format. The "Save As..." menu in most word processors will allow you to select your format.

If your word processor does not allow you to save in one of these formats, the college does allow students to download a copy of Microsoft Office for free. Instructions on doing this can be found in the Start Here area of the course, under Step 3: Help with Blackboard and Technology

If you do not submit in one of these formats, I may not be able to open the file (warning: I cannot open files in Microsoft Works or Apple Pages format). If I cannot open the file, you will receive a zero for the assignment.

The paper is due by the Session 15 due date, listed in the course calendar. Once your paper is completed, you must submit it using the link above. Once you have uploaded the assignment, you should click back on this link to confirm that the file was correctly uploaded; you should check that the uploaded file is the one you intended to upload, and that the file was not corrupted during upload. If there are any problems with the uploaded document you should send a copy of the correct document to your instructor via e-mail or messages (whichever one your instructor uses).

The grading structure for this paper is outlined below; more detail is available in the full grading rubric, which you can find by clicking on the link above (where it says "Annotated Bibliography").

  • Summary of first source: up to 10 points
  • Summary of second source: up to 10 points
  • Summary of third source: up to 10 points
  • Summary of fourth source: up to 10 points
  • Summary of fifth source: up to 10 points
  • Formatting of document and APA citations: up to 10 points
  • Quality of writing: up to 15 points

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91836850
  • Price:- $30

Priced at Now at $30, Verified Solution

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As