Ask Other Engineering Expert

ASSIGNMENT STATEMENT

Climate change is a serious challenge to the Kingdom of Saudi Arabia, which is under tremendous pressure as a result of the hyper aridity of the climate, severe shortage in water resources, rapidly growing population and reliance on fossil fuels, the latter of which is viewed globally as a major source of GHGE.

In 2005 Saudi Arabia ratified de Kyoto protocol and therefore it has by law to abide to its legal requirements.

  • The Kyoto protocol major feature is that it has mandatory targets on greenhouse-gas emissions for the world's leading economies which have accepted it. These targets range from -8 per cent to +10 per cent of the countries' individual 1990 emissions levels "with a view to reducing their overall emissions of such gases by at least 5 per cent below existing 1990 levels in the commitment period 2008 to 2012." In almost all cases -- even those set at +10 per cent of 1990 levels -- the limits call for significant reductions in currently projected emissions.
  • The agreement offers flexibility in how countries may meet their targets. For example, they may partially compensate for their emissions by increasing "sinks" -- forests, which remove carbon dioxide from the atmosphere. That may be accomplished either on their own territories or in other countries. Or they may pay for foreign projects that result in greenhouse-gas cuts. Several mechanisms have been set up for this purpose.
  • Some mechanisms of the Protocol had enough support that they were set up in advance of the Protocol's entry into force. The Clean Development Mechanism, for example -- through which industrialized countries can partly meet their binding emissions targets through "credits" earned by sponsoring greenhouse-gas-reducing projects in developing countries -- already had an executive board before the Kyoto Protocol entered into force on 16 February 2005.

The clean development mechanism (getting developing countries involved)

  • The Kyoto Protocol does not set limits on the greenhouse-gas emissions of developing nations. Yet the greenhouse-gas emissions of developing countries are growing, especially in the case of enormously populous states such as China and India, which are rapidly expanding their industrial output.
  • Because the atmosphere is equally damaged by greenhouse-gas emissions wherever they occur and equally helped by emissions cuts wherever they are made, the Protocol includes an arrangement for reductions to be "sponsored" in countries not bound by emissions targets.
  • The so-called Clean Development Mechanism in simplified form works this way: Industrialized countries pay for projects that cut or avoid emissions in poorer nations - and are awarded credits that can be applied to meeting their own emissions targets. The recipient countries benefit from free infusions of advanced technology that allow their factories or electrical generating plants to operate more efficiently -- and hence at lower costs and higher profits. And the atmosphere benefits because future emissions are lower than they would have been otherwise.
  • The mechanism has drawn extensive interest from rich and poor countries alike, and steps have been taken to put it into operation even before the Protocol takes effect. In particular, it is cost-effective and offers a degree of flexibility to industrialized countries trying to meet their targets. It can be more efficient for them to carry out environmentally useful work in developing countries than at home, where land, technology, and labor are generally more costly. The benefits to the climate are the same.
  • The system also appeals to private companies and investors. The mechanism is meant to work bottom-up -- to proceed from individual proposals to approval by donor and recipient governments to the allocation of "certified emissions reduction" credits. Countries earning the credits may apply them to meeting their emissions limits, may "bank" them for use later, or may sell them to other industrialized countries under the Protocol's emissions-trading system. Private firms are interested in the mechanism because they may earn profits from proposing and carrying out such work and because they may develop good reputations for their technology which will lead to further sales. A possible benefit for everyone is that the potential for profits may lead these businesses to develop even more useful technologies.
  • The Clean Development Mechanism is overseen by an Executive Board. To be certified, by the Clean Development Mechanism Executive Board, a project must be approved by all involved parties, demonstrate a measurable and long-term ability to reduce emissions, and promise reductions that would be additional to any that would otherwise occur.

Resorting to published literature or other media resources Investigate and explain in a short essay, how is the Kyoto protocol being addressed and implemented in practice in the KSA, name the designated national authority for the Clean Development Mechanism in KSA, discuss the tasks of the national agencies dealing with the Kyoto protocol and the kind of services offered by it.

Your essay should be structured using the following format:

a) Introduction,

b) Body

c) Conclusions

d) Citations

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M92067565

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As