Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Other Engineering Expert

Assessment

Use the format provided in the Assessment Two Example to guide you in the look, feel and requirements of your submission.

The assessment involves:

i) Write an abstract for your research (this abstract will take the form of one suitable for a journal article). It should take the following form:
a. TOPIC: Outline topic area

b. SIGNIFIGANCE: Why is your research important?

c. METHODOLOGY: How are you conducting your research?

d. FINDINGS: What came from your research? (Create your own finding - make it up)

e. CONCLUSION: As a result we recommend.....

The abstract should be no longer than 200 words. While the abstract is the first activity it should be the very last thing that you write. If you try and write this first you might struggle. You won't have any findings (as you are not undertaking any real research), so pretend that you did the experiment and mention your findings.

ii) You need IMPROVE and resubmit your Introduction Chapter from Assessment One. You should use the feedback from the marked version and make all the necessary improvements. If you need to slightly change the wording of your research question, you may do so. The markers will have greater expectations compared to assessment one.

Reflective Practice

You have an opportunity to IMPROVE your assessment one score

- If your assessment one score was below 50% you have an opportunity to improve your score. If in the resubmission your introduction score is 2 out of 4 your assessment one mark will be upgraded to 13 out of 30. If your score is 3 out of 4 your assessment one mark will be upgraded to 15 out of 30. If your score is 4 out of 4 your assessment one score will be upgraded to 18 out of 30.

- If your assessment one score was above 50% you have an opportunity to improve your score. If in the resubmission your introduction score is 4 out of 4 your assessment one mark will be upgraded with up to 3 bonus points (score cannot exceed 30)

iii) Update and submit your Literature Planner

iv) Complete a Literature Review Chapter. This is only a short literature review (~2000 words) identifying key findings in the area, leading into the gaps in our current

understanding that your research studies seek to address. This should then lead into a research proposal/design.

v) Complete a Research Design Chapter. This is only a short research design (~1000 words) where you will need to:

- Articulate and justify a research design that will answer your research question (and hypothesis, if appropriate) that addresses the identified gap(s) in knowledge;
- The design decisions should be justified by the literature;
- Identify the specific methods that will be used to gather data (e.g., participants, methods, data collection instruments/measures/hardware/software, types of data generated) and justify how this complements your research question; and
- Identify any limitations (e.g. weaknesses) in your research design;
- Briefly discuss the ethical considerations that are specific to your research design or topic in general (≤ 200 words).
- The design decisions should be justified by the literature;

I have attached the introduction that i had prepared by using the journals mentioned in the literature planner which is also attached.

My research question is "influence of variations in load, indenter size and sample preparations on nano indentation test of ultra fine grained aluminum fabricated by accumulative roll bonding process". so assessment 2 should be the detailed explanation of this research question.

I had attached an example of assessment 2 and also the requirements (marking rubric) demanded by the university. some important details are quoted in the assessment two details which is also attached with this mail. please maintain the flow and try not to deviate from the research question.

I am doing masters in mechanical engg and its a subject called research methods. We have to submit a 2000 word literature review and 1000 words literature design and i have done the introduction part so i would like to know that if you are able to do that as my research question ie we have to find a research question from the downloaded journals and i have found one.so could you complete that with the journals that i have downloaded?

Attachment:- mas.rar

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91767492
  • Price:- $120

Guranteed 48 Hours Delivery, In Price:- $120

Have any Question?


Related Questions in Other Engineering

Conceptual design of forced-free-mixed convection

Conceptual Design of Forced-Free-Mixed Convection Experiment This assessment is to be completed individually. 1. Learning Outcomes: - Develop a basic ability to conceptually design an experimental apparatus - Use theory ...

Assignment -problem 1 - given is the lcc difference

Assignment - Problem 1 - Given is the LCC difference equation that represents some LTI system: y(n) - ¾y(n-1) - ¼y(n-2) = x(n) + x(n-1)   a) Find the impulse response of the system (solve the LCCDE). b) Draw a block diag ...

Assessment practical reportproduce a short technical report

Assessment: Practical Report Produce a short technical report in a form consistent with proteomic journals covering the techniques, results and interpretation of your proteomics experiment in the practical classes. The r ...

Assignment 11 what is the purpose of ore reserve and

ASSIGNMENT 1 1. What is the purpose of ore reserve and resource estimation? Why are resource and reserve estimates important to the mining industry? 2. What is meant by ore? What is meant by the term waste? How is the di ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

1 online discussion forum - post your proposed topic and

1. Online Discussion forum - Post your proposed topic and chosen data set as well as a short plan for the project. This is required for approval of the topic. As discussed, students must select unique topics, therefore i ...

Load fault level analysis amp protection design of a remote

LOAD, FAULT LEVEL ANALYSIS & PROTECTION DESIGN OF A REMOTE AREA MICROGRID Assignment Please undertake the following analyses: 1. Calculate the 3-phase fault levels on Bus 2, Bus 3 and Bus 4 with the main supply connected ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Projection of planes1 a regular pentagon of 25 mm side has

Projection of Planes 1. A regular pentagon of 25 mm side has one side on the ground. Its plane is inclined at 45° to H.P. and perpendicular to the V.P. Draw its projections. 2. Draw the projection of a circle of 50 mm di ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As