Ask Other Engineering Expert

1. Which of the following is a correct statement concerning omega (ω)?

A. to must be converted to degrees
B. to is no longer being used.
C. to must be converted to radians.
D. to is equal to 2Πf

2. Which of the following is the same as 6 nanofarads?
A. 6 x 10-12 farads
B. 6 x 10-9 farads
C. 6 x 106 farads
D. 6 x 10-6 farads

3. Which of the following is not a passive component?
A. Capacitor
B. Transistor
C. Resistor
D. Inductor

4. How many radians are equal to 57.3 degrees?
A. 1.0
B. Π
C. 2Π
D. Π2

5. In the time-constant curve of a resistor and large inductor, the initial part of the curve that represents the start-up of current is blank. That blank space is due to
A. inductive reactance.
B. switching delay.
C. slow switching speed.
D. kickback voltage.

6. Canactive reactance is measured in

A. farads.
B. henries.
C. ohms.
D. microfarads.

7. On a graph of a sine wave, time
A. stands still if the graph is plotted on the radian axis.
B. stands still if the graph is plotted on a degree axis.
C. gets later as you move to the right.
D. gets later as you move to the left.

8. Which of the following is a correct example of scientific notation?
A. 6000 x 102 Hertz
B. 600,000 Hertz
C. 600 x 103 Hertz
D. 6 x 105 Hertz

9. Which of the following is a component that opposes any change in current through it?
A. Air-dielectric capacitor
B. Coil
C. Resistor
D. Mylar-dielectric capacitor

10. Which of the following is the correct formula for determining capacitive reactance?

A. Xc = 0.159/fc
B. Xc = 27cf/t
C. Xc= 0.159 xR xC
D. Xc = 1/ωC

11. Any periodic wave, regardless of its wave shape, can be constructed with a combination of
A. triangular waves.
B. angles.
C. square waves.
D. sine waves.

12. Which of the following is a component that opposes any change in voltage across its terminals?
A. Capacitor
B. Transistor
C. Inductor
D. Resistor

13. Which of the following is correct?
A. Π radians = 360°
B. Π radians = 90°
C. Π radians = 270°
D. Π radians = 180°

14. According to Faraday's Law, every time there's motion between a conductor and magnetic field, there's
A. a current generated.
B. heat generated.
C. a voltage generated.
D. friction.

15. When an AC sine wave current flows through an inductor, the current
A. is a square wave.
B. lags the voltage.
C. leads the voltage.
D. is in phase with the voltage.

16. Components that do not generate a voltage are called_____components
A. passive
B. intrinsic
C. bilateral
D. active.

17. Which of the following is correct for calculating inductive reactances?

A. XL= 1/2 ΠfL
B. XL - 2ΠfL

C. XL = Ldi/dt
D. XL = time constant x L

18. How long does it take a capacitor to charge through a resistor to 63% of the applied DC voltage?

A. 0.63 of one time constant
B. 0.63 seconds
C. One time constant
D. 50% of one time constant

19. How many radians are there in 90 degrees?
A. Π radians
B. 2Π radians
C. Π/2 radians

D. Π/4 radians

20. Which of the following is the meaning of di/dt?

A. Rate of change of current
B. Magnitude of current
C. Change in current
D. Current at some instant of time

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91733086

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As