Ask Other Engineering Expert

1. What is the sum of 130 + j180 and 5 - j30?
A. (1352) + (j150)2
B. 135 + j210
C. 135 + j150
D. 135 - j150

2. Which of the following is a correct equation?
A. Q = fr - bandwidth
B. Q = fr x bandwidth
C. Q = fr / bandwidth
D. Q = fr + bandwidth

3. Which one of the following expresses an impedance of 50 OHMS with no resistance component in rectangular coordinates?
A. 50 + j0 OHMS
B. 0 + j50 OHMS
C. 50 OHMS
D. 100 OHMS

4. When one vibrating body sets a second body into vibration at the same natural frequency it's called
A. natural sympathy.
B. mutual sympathy.
C. sympathetic vibration.
D. sympathy.

5. Which of the following is a parasitic suppressor?
A. Back-to-back transistors
B. A long piece of wire
C. Ferrite bead
D. Bead ledge

6. At the resonant frequency, the impedance of a parallel LC circuit is
A. minimum.
B. equal to XL-XC.
C. equal to XL+Xc.
D. maximum.

7. Which of the following is a measure of how sharply a basic series resonant circuit tunes?
A. Xc
B. XL
C. XL-Xc
D. Q

8. The reciprocal of capacitor Q is
A. bandwidth
B. sus ceptance.
C. dissipation factor.
D. gain.

9. The bandwidth of a series-tuned circuit is that range of frequencies between where the voltage is of the maximum voltage.
A. 33.3%
B. 75.2%
C. 70.7%
D. 50.5%

10. Tuning forks have been used as timing oscillators in
A. automobiles.
B. watches.
C. jet engines.
D. broadcast transmitters.

11. You can lower the resonant frequency of a series-tuned RLC circuit by
A. increasing R.
B. increasing L.
C. decreasing C.
D. decreasing R.

12. In a series RLC circuit, the current is
A. equal to voltage divided by inductive reactance.
B. equal to inductive reactance divided by resistance.
C. maximum at the resonant frequency.

D. minimum at the resonant frequency.

13. Parasitic oscillations can be caused by
A. very low inductance in an RLC circuit.
B. very low capacitance in an RLC circuit.
C. very high resistance in an RLC circuit.
D. distributed components.

14. Which of the following is correct regarding a right triangle?
A. Sine of angle = hypotenuse/opposite side
B. Sine of angle = adjacent side/opposite side
C. Sine of angle = opposite side/hypotenuse
D. Sine of angle = opposite side/adjacent side

15. You can increase the resonant frequency of a series-tuned RLC circuit by
A. decreasing C.
B. increasing R.
C. increasing L.
D. decreasing R.

16. Which of the following is a waveform that has no harmonic frequencies?
A. Sawtooth
B. Sine
C. Triangular
D. Square

17. In a certain tuned series RLC circuit XL = XC. The impedance of that circuit is equal to

A. XL + XC
B. XL - XC.
C. R.
D. R2.

18. You strike one tuning fork and another nearby tuning fork starts to vibrate. In order for this to happen
A. they must be resonant to be the same frequency.
B. both tuning forks must be electrically connected.
C. both tuning forks must be in a vacuum.
D. there must be a feedback circuit between them.

19. 40 ∠ 40° x 30 ∠ 20° equals
A. 70 ∠ 80°.
B. 70 ∠ 800°.

C. 1200 ∠ 60°.
D. 0.75 ∠ 60°.

20. Which of the following can be used to offer a higher impedance to all frequencies except the resonant frequency?

A. Series LC circuit
B. RC time constant circuit
C. RL time constant circuit
D. Parallel LC circuit

21. An inductor that has an inductive reactance of 12 OHMS and a DC resistance of 1 OHM has a Q of
A. 12/1.
B. 5/12
C. 12/2.
D. 1/12.

22. In a series-resonant RLC circuit, the voltage across L is ____ with the voltage across C.
A. 180° out of phase
B. 270° out of phase
C. in phase
D. 90° out of phase

23. Which of the following is equal to the angular velocity (ω)?

A. ω = 2ΠL
B. ω = 2Πf
C. ω = 2ΠC
D. ω = 2ΠR

24. In a purely capacitive circuit with an applied sine wave voltage, the voltage
A. will lag the current.
B. will be in phase with the current.
C. must be DC.
D. will lead the current.

25. The resonant frequency curve of a series RLC circuit will indicate broader tuning at the resonant frequency if you increase the

A. capacitance of the circuit.
B. induction of the circuit.
C. Q of the circuit.
D. resistance of the circuit.

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91733097

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As