Ask Other Engineering Expert

1. What are the processes for developing a new mine in Western Australia?

2. Schedule production for the mine detailed below to optimize copper concentrate at minimum mining cost using a maximum of five stopes
operating at a time. Assume each month consists of 21 operating days. The mine has the following stopes with the characteristics as outlined.

1681_What are strategic risks.png

The schedule must aim for the following as far as possible:

a) Maximum, constant tonnage per month
b) Constant grade
c) Constant cost

3. What are strategic risks? How would you manage these risks?

4. Define short, medium and long term planning?

5. Discuss some of the factors that an engineer needs to account for when planning a mining operation

6. What techniques of pit optimisation are available?

7. Define the following in relation to network techniques (CPM and PERT)

a. Earliest start time

b. Latest start time

c. Earliest finish time

d. Latest finish time

e. Slack

f. Float

8. A project is defined by the list of activities detailed in Table 1.

959_What are strategic risks1.png

i. Draw the network as an activity on the arc network
ii. Find the critical path
iii. Find the slack for each activity

9. The network shown in the next diagram is to be used in the planning of the installation of an underground crusher station. Determine the total project time and the critical path.

10. A 10,000 tpd underground coal mine is in the planning stages. It is anticipated that salaried and supervisory staff will constitute 20% of the work force. Each production crew will consist of 8 miners and 1 foreman. Several of the other mines operated by the company have been averaging 10 tonnes per person per day and 200 tonnes per unit shift. However there is no reason not to believe that the new mine will average 15 tonnes per person per day and 300 tonnes per unit shift. Determine the size of the required labour force for both rates of productivity.

11. Calculate the Net Values for gold ore containing 1.3 g/t, 4.5 g/t , 8.0 g/t and 15.7 g/t. Use the input values given below.

1078_What are strategic risks2.png

12. Cut-off Grade

a. Following are the variables for choosing the "Optimum Cut-off Grade":

M = maximum amount of material that the mine can produce in
any given time (mine capacity)
C = maximum amount of ore that can be put through the concentrator in
any given time (mill capacity)
R = maximum amount of final product that can be produced in
the given time period (production capacity)
m = mining costs, $/t of material mined
c = concentrator cost, $/t of ore milled
r = smelting, refining, packaging, insurance cost, $/kg of final product
f = fixed cost
s = selling price
y = recovery
T = length of production period
Qm = quantity of material to be mined
Qc =quantity of ore sent to the concentrator
Qr = amount of product actually produced over this production period
a. Using these above variables, develop the basic equations for
i. total cost, Tc
ii. revenue, R
iii. profit, P
b. Develop the equations for cut-off grade assuming that
i. mining rate is the governing constraint
ii. concentrating rate is the governing constraint
iii. refining rate is the governing constraint
13. Define the following terms used with respect to the Lerchs-Grossmann 3D algorithm
a) Directed arc
b) Edge
c) Weight
d) Node
e) Graph
f) Directed graph
g) Sub graph
h) Closure
i) Maximum closure
j) Circuit
k) Chain
l) Cycle
m) Path
n) Tree
o) Root
p) Branch
q) Twig
14. Discuss the floating cone process
15. Describe three problems with regard to the application of the floating cone technique. What are the positive aspects of the floating cone technique?

16. Summarise the steps in the Lerchs-Grossmann 2D algorithm

17. Define the terms:
a) Project year
b) Production year
c) Calendar year

18. Summarise the basic concepts behind Lane's algorithm

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91364421
  • Price:- $300

Guranteed 48 Hours Delivery, In Price:- $300

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As