Ask Other Engineering Expert

1. Assume that at Pine Valley Furniture products are composed of components, products are assigned to salespersons, and components are produced by vendors. Also assume that in the relation PRODUCT (Prodname, Salesperson, Compname, Vendor), Vendor is functionally dependent on Compname and Compname is functionally dependent on Prodname. Eliminate the transitive dependency in this relation and form 3NF (third normal form) relations.

2. Transform the E-R diagram of Figure 8-3 into a set of 3NF relations. Make up a primary key and one or more non-keys for each entity.

3. Transform the E-R diagram of Figure 9-21 into a set of 3NF relations.

4. Consider the list of individual 3NF relations below. These relations were developed from several separate normalization activities.

PATIENT(Patient_ID, Room_Number, Admit_Date, Address)

ROOM(Room_Number, Phone, Daily_Rate)

PATIENT(Patient_Number, Treatment_Description, Address)

TREATMENT(Treatment_ID, Description, Cost)

PHYSICIAN(Physician_ID, Name, Department)

PHYSICIAN(Physician_ID, Name, Supervisor_ID)

(a) Merge these relations into a consolidated set of 3NF relations. State whatever assumptions you consider necessary to resolve any potential problems you identify in the merging process.

(b) Draw an E-R diagram for your answer to part "a".

5. Consider the following 3NF relations about a sorority or fraternity:

MEMBER(Member_ID, Name, Address, Dues_Owed)

OFFICE(Office_Name, Officer_ID, Term_Start_Date, Budget)

EXPENSE(Ledger_Number, Office_Name, Expense_Date, Amt_Owed)

PAYMENT(Check_Number, Expense_Ledger_Number, Amt_Paid)

RECEIPT(Member_ID, Receipt_Date, Dues_Received)

COMMITTEE(Committee_ID, Officer_in_Charge)

WORKERS(Committee_ID, Member_ID)

(a) Foreign keys are not indicated in these relations. Decide which attributes are foreign keys and justify your decisions.

(b) Draw an E-R diagram for these relations, using your answer to part "a".

(c) Explain the assumptions you made about cardinalities in your answer to part "b".

Explain why it is said that the E-R data model is more expressive or more semantically rich than the relational data model.

6. Consider the following functional dependencies:

Applicant_ID -> Applicant_Name

Applicant_ID -> Applicant_Address

Position_ID -> Position_Title

Position_ID -> Date_Position_Opens

Position_ID -> Department

Applicant_ID + Position_ID -> Date_Applied

Applicant_ID + Position_ID + Date_Interviewed -> (Nothing)

(a) Represent these attributes with 3NF relations. Provide meaningful relation names.

(b) Represent these attributes using an E-R diagram. Provide meaningful entity and relationship names.

7. Suppose you were designing a file of student records for your university's placement office. One of the fields that would likely be in this file is the student's major. Develop a coding scheme for this field that achieves the objectives outlined in Chapter 10 for field coding.

8. Suppose you created a file for each relation in your answer to question "3" above. If the following queries represented the complete set of accesses to this database, suggest and justify what primary and secondary key indices you would build.

(a) For each PART in Item_Number order list in Vendor_ID, sequence all the vendors and their associated prices for that part.

(b) List all PART RECEIPTs, including related PART fields for all the parts received on a particular day.

(c) For a particular VENDOR, list all the PARTs and their associated prices that VENDOR can supply.

Other Engineering, Engineering

  • Category:- Other Engineering
  • Reference No.:- M91349377
  • Price:- $45

Guranteed 36 Hours Delivery, In Price:- $45

Have any Question?


Related Questions in Other Engineering

Register design a cpu register is simply a row of

Register design A CPU register is simply a row of flip-flops (i.e. SR, JK, T, etc) put side by side in an array to make the size of register required. For example, an 8 bit register has 8 flip-flops side by side for stor ...

A detailed review of spatial modulation and simulation

A Detailed Review of Spatial Modulation and Simulation Learning Outcomes a. Learn how to model mobile communication channels d. Discern knowledge development and directions on the recent advances in 4G to the research pr ...

Mine safety amp environmental engineering assignment -part

Mine Safety & Environmental Engineering Assignment - Part 1 - Questions 1. Occupational health and safety is the primary factor that needs to be considered in the mining industry. Discuss this statement. 2. Define the fo ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Learning outcomes evaluate multiuser communication and

Learning Outcomes Evaluate multiuser communication and resource sharing techniques; Apply the techniques of, and report on, digital communication applications using Matlab and hardware devices. Assignment Description The ...

Operations engineering assignment -please select only one

Operations Engineering Assignment - Please select only one of the following case studies for your assignment: CASE A. Tesla Motors Tesla is an innovative manufacturer that designs, assemble and sells fully electric vehic ...

Select a risk problem from the list below and prepare a

Select a risk problem from the list below and prepare a risk management plan in accordance with AS/NZS ISO 31000:2009. Please ensure that: - Establish the context clearly, in accordance with the Standard; - Define your s ...

Engineering materials term paper assignment -conduct a

ENGINEERING MATERIALS TERM PAPER ASSIGNMENT - Conduct a thorough literature search and write a 15-20 page technical review paper on the evolution of the engineering materials used in the manufacturing of any one of the f ...

Task 1using the lab kit design a circuit for the processor

Task 1: Using the lab kit, design a circuit for the processor to control the output of a connected 7-segment LED display device. You will be provided with a standard common anode 7-segment display of the type FND-507 (or ...

Control theory - lab reportsfor experiments 1 to 4 you must

Control Theory - Lab Reports For experiments 1 to 4 you must undertake the following: a) At the start of each section (including the pre-lab activities) there are a number learning outcomes. That is, what students should ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As