Question:1. Complete the case study analysis with financial calculations and analysis on an Excel spreadsheet to support your analysis.

MEMORANDUM

Subject: Road King Trucks:

1. A report broken down into the following sections:
- Summary results and recommendations-up front, concise, and to the point.
- Answers to the 6 questions asked-devote a paragraph to each, with individual headings
- Attached exhibits which are readable and understandable (I suggest using Calibri font in 11 pitch for the spreadsheet(s), because it is plain and easy to read)
• Spreadsheet printout(s) showing your derivation of
o Operating Cash Flows
o Incremental Cash Flows, including investment and salvage o Warranty costs o WACC
o NPV, IRR, Payback, and Profitability Index
• Any other supporting exhibits you feel are relevant
- A file containing your spreadsheet file, including all supporting elements. I want to get a sense of how well you used the power of the Excel program to make your calculations.

2. A simple typed report is adequate. I do not need fancy graphics or covers.
- Use 12 pitch, Times Roman font for the body of the report.
- Single spacing is preferred, and will allow you more than enough space to complete your report in less than 5 pages.
- You should refer back to your exhibits for data or calculations, keeping them out of the main body of the report.
- Make sure name is listed on a cover sheet, as well as the project title and the date. The cover page does not count against the 5 page limit.

Subject: Road King Trucks: Stuff to Figure Out

Below is a list of items you need to identify and quantify to complete the Road King Trucks case
A. For Each Year
1. Revenue
2. Variable costs
a. Labor cost per bus
b. Parts cost per bus
c. Engine costs per bus (2 options)

3. SG&A costs
4. Training costs
5. Warranty costs
a. Bus
b. Engine (2 options)
6. Depreciation
7. Working Capital needs
B. Project Related
1. Investment costs
C. Cost of Capital
1. Company's weighted average cost of capital (WACC)
2, Appropriate cost of capital for this project

And, after doing this, you have to form a basis for a go/no go decision on the project, with appropriate support for your decision (think NPV and IRR).

Your final report, limited to 5 pages plus exhibits, should include a spreadsheet containing all relevant calculations, and answers to the 6 questions listed on page 2 of the case statement. Keep in mind that an answer or recommendation is only as good as the supporting analysis performed to reach it. What you "think" is irrelevant, unless it can be supported with facts.

Road King Trucks

Introduction

Michael Livingston has recently been hired as the CEO of Road King Trucks, Inc. Previously he had been the marketing manager for a large manufacturing company and had established a reputation for identifying new consumer trends. Road King Trucks Inc. is a California-based truck manufacturing company. The company is well known for manufacturing large, heavy-duty trucks at a reasonable cost. One of its greatest achievements is that its trucks can be easily modified or customized for different applications. Road King Trucks also builds school buses.

The company is considering an expansion of its current product line to include transit buses. Mr. Livingston feels that due to high gasoline prices, commuters will be more willing to consider using mass transit instead of using their cars to commute to work.

Company Profile

Road King Trucks, Inc. was established by the Smith brothers in 1880 as the California Wagon Company. The firm started manufacturing horse-drawn wagons to serve the growing population in California. The brothers quickly realized that the times were changing, so they started looking for the technologies that would keep them at the forefront of their field of business. In 1915, the Smith brothers decided that they needed to make trucks as replacements for the wagons, because trucks were starting to serve the same uses as wagons, and the wagon industry was not going to be viable in the longer term.

The company started making school buses in the early 1940's. Most manufacturers had been commissioned by the government to produce different large vehicles to support World War II operations. Road King Trucks opted to produce buses. It was an easy decision to make, since the buses would use common parts with the company's trucks, and the customers were local governments. Starting in the 1950's, the school bus business accounted for about 50% of Road King Trucks' revenues.

The Transit Bus Opportunity

Mr. Livingston arranged a meeting with the firm's top management, as well as the chief design and manufacturing engineers to propose his new product. He presented an argument that more individuals in the United States and Canada would be willing to use public transportation than before, because people were becoming more environmentally conscious. Also, recent increases in fuel costs seemed to be long lasting. This was an opportunity to get people hooked on transit buses, as he put it.

The proposal under consideration was for the introduction of a large, public transport bus. To distinguish Road King Trucks from other manufacturers, the proposal included details about the level of comfort, air-conditioning, efficiency, and quietness of operation that needed to be developed.

Mr. Phillips and Mr. Lopez, the two engineers, reacted enthusiastically and quickly pointed out that the bus could be based on the company's trucks. The frame currently used for building the trucks could be modified to accommodate buses at a relatively low cost. The marketing vice president, Mr. Chen, pointed out that a marketing analysis could be done quickly, and at a reasonable cost. At this point, Mr. Livingston charged the participants in the meeting to produce a financial plan for the development and production of a transit bus.

Public Transportation

The use of public transportation had declined steadily since the 1950's. Most people were opting to use their personal vehicles for all of their transportation needs. Recently, however, most of the metropolitan areas in the United State and Canada, the target markets for the new bus, had become more and more congested; and parking, which was already very expensive, was becoming scarce.

This combination of trends has renewed the public's interest in good and reliable public transportation. Several municipalities have been campaigning to their residents and commuters that they should use public transportation for business commuting, and only use their cars for shopping and weekend activities. However, such campaigns need to be supported by making high quality public transportation available to the target riders.

The Decision

Three weeks after the initial meeting, the vice presidents presented the sales and cost forecasts shown in the attached exhibits. The information presented contains the cost of production, financing information, and warranty cost estimates. The proposals also contained two engine options for the engines: The Detroit engine, and the Marcus engine. The Detroit engine was more expensive to install, but had a lower warranty cost. The Marcus engine was less expensive to install, but had a higher warranty cost. This begged the question: Which engine should be used?

Issues and Analyses

Mr. Livingston noticed that there was a great deal of enthusiasm among the management group about the transit bus opportunity, but his cautious nature told him to also seek a more objective viewpoint. Consequently, he sought out you to analyze the proposed project and provide your recommendations directly to him. The issues he wants you to address in your analysis and report are the following:

1) How much importance should be given to the energy cost situation?

2) What are the project's cash flows for the next twenty years? What assumptions did you use?

3) What is the company's cost of capital? What is the appropriate discount factor (which may be different) for you to use in evaluating the bus project?

4) If you decide to go ahead with the project, which of the two engines should be used in the bus, and why?

5) Evaluate the quality of the project, by using appropriate capital budgeting techniques.

Would you recommend that Road King Trucks accept or reject the project? What are the key factors on which you base your recommendation?

2. Answer the 6 questions with a 1 paragraph analysis for each of the 6 questions.

3. The data information can be found on Exhibits 1, 2 & 3 to support our financial analysis of the project. Please show all relevant excel financial calculations to support our analysis for the 6 questions.

Exhibit 1: Sales and Cost Forecast

The sales forecast is based on proj ected levels of demand. All the numbers are expressed in today's dollars. The forecasted average inflation per year is 3.5%

Engine choices

Exhibit 2: Investment Needs

To implement the project, the firm has to invest funds as shown in the following table:

Straight fine depreciation will be used for the sake of simplicity.

To facilitate the operation of manufacturing the transit buses, the company will have to allocate funds to net working capital (NWC) equivalent to 10% of annual sales. The investment in NWC will be recovered at the end of the project.

The equipment will be sold for salvage at about $15,000,000 at the end of the project.

Exhibit 3: Financing Assumptions

The following assumptions are used to determine the cost of capital.

Historically, the company has maintained a debt ratio is 40%. This ratio was used, because lowering the debt implies giving up the debt tax shield, and increasing it makes debt service a burden on the firm's cash flow. In addition, increasing the debt level may cause a reduced rating of the company's bonds. The marginal tax rate is 40%. All the numbers are expressed in today's dollars. The forecasted average inflation per year is 3.5%.

Cost of debt:

The company's bond rating is roughly at the high end of the A range. Surveying the debt market yielded the following information about the cost of debt for different rating levels:

The company's current bonds have a yield to maturity of about 6.5%.

Cost of equity:

The current 10-year Treasury notes have a yield to maturity of 2.25% and the forecast for the S&P 500 market premium is 8.75%. The company's overall p is 1.15.